Duplicate the Factory Appearance of Zinc Phosphate - Zinc Phosphate duplicates OEM Zinc Phosphate plating. This charcoal gray OEM plating was used on inner and outer tie rod ends, tie rod adjustment sleeves, center links, some spindles hood hinges and latches, sway bars and some shift and carb linkages. Duplicated to match the exact appearance of Zinc Phosphate plating in a very durable enamel aerosol formulation. Temp. resistant to 300 degrees F, one 12 oz. net wt. covers up to 6 sq. foot 4-8% gloss. Use PRE Painting Prep (10041Z) to remove residual grease and oil before coating